EN ISO 21969

High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)

Abstract

ISO 21969:2009 applies to high-pressure flexible connections intended to be connected to cylinders or cylinder bundles with nominal filling pressures up to 25 000 kPa at 15 °C for use with the following medical gases:

  • oxygen;
  • nitrous oxide;
  • air for breathing;
  • helium;
  • carbon dioxide;
  • xenon;
  • mixtures of the gases listed above;
  • air for driving surgical tools;
  • nitrogen for driving surgical tools;
  • oxygen-enriched air.

ISO 21969:2009 applies to high-pressure flexible connections intended to connect cylinders or cylinder bundles to manifolds within sources of supply of medical gas pipeline systems complying with ISO 7396-1.

ISO 21969:2009 applies to high-pressure flexible connections intended to connect a cylinder to an inlet port of medical equipment (e.g. anaesthetic workstation or lung ventilator) fitted with an integral pressure regulator complying with ISO 10524-1.

DIN EN ISO 21969:2010-04 (E)
High-pressure flexible connections for use with medical gas systems (ISO
21969:2009)
Contents Page
Foreword ……………………………………………………………………………………………………………………………………….3
1 Scope ……………………………………………………………………………………………………………………………..4
2 * Normative references ……………………………………………………………………………………………………5
3 Terms and definitions ……………………………………………………………………………………………………..5
4 Terminology ……………………………………………………………………………………………………………………6
5 General requirements ……………………………………………………………………………………………………..7
5.1 Safety ……………………………………………………………………………………………………………………………..7
5.2 Alternative construction ………………………………………………………………………………………………….7
5.3 Materials …………………………………………………………………………………………………………………………7
5.4 Design requirements ……………………………………………………………………………………………………….7
5.5 Constructional requirements …………………………………………………………………………………………..9
6 Test methods ………………………………………………………………………………………………………………….9
6.1 General …………………………………………………………………………………………………………………………..9
6.2 Type tests ……………………………………………………………………………………………………………………..10
7 Marking, colour coding and packaging ………………………………………………………………………….12
7.1 Marking …………………………………………………………………………………………………………………………12
7.2 Colour coding ……………………………………………………………………………………………………………….13
7.3 Packaging …………………………………………………………………………………………………………………….13
8 Information to be supplied by the manufacturer …………………………………………………………….13
Annex A (informative) Rationale ……………………………………………………………………………………………………15
Bibliography …………………………………………………………………………………………………………………………………16
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 93/42/EEC ……………………………………………………………………….17